Introducing the Smart User Interface
36
IQS-8500 Series and IQS-8120NGE/8130NGE
Starting the Module Application
4.
For
IQS-8120NGE/IQS-8130NGE only,
on the
Available Applications
,
under the
Applications
tab, press
Packet Analyzer
to start the Smart
User Interface (SUI) for Ethernet and Fibre Channel test.
Refer to the SONET/SDH Application user guide for more information
on SONET/SDH.
The exit button ( X ) closes the
Network Analyzer
,
SONET/SDH
Analyzer
, and/or
Ethernet Analyzer
applications. If a test is created,
one of the following confirmation messages is displayed, based on the
standalone feature status (enabled or not). Refer to the IQS-600 user
guide for more information on the standalone feature.
Exiting the SUI while a test is created and standalone is disabled:
Are you sure you want to exit the Network Analyzer
,
SONET/SDH Analyzer
, and
Ethernet Analyzer? Any unsaved
information will be lost.
Exiting the SUI while a test is created and standalone is enabled:
Exiting the application will maintain the module alive as the
Standalone mode is enabled. Are you sure you want to exit?
