Creating and Starting a Test Case
118
IQS-8500 Series and IQS-8120NGE/8130NGE
Fibre Channel BERT Test Case
3.
Framing selection:
3a.
Select the test framing
mode.
FC Unframed
consists in sending a frame without EOF (End Of
Frame).
FC Unframed
with the
Enable Sync
check box selected consists
of continuously sending frames that last approximately 1 sec.
Thus sending a sync pattern that regularly keeps the link
synchronized. Frames are separated by the minimum Inter-Frame
Gap (IFG).
FC Framed Layer 1
consists of sending a valid frame (8 to 2148
bytes) without Header, and CRC (Cyclic Redundancy Check).
Refer to
Size
on page 231 for more information on the frame size.
FC Framed Layer 2
consists of sending a valid frame (36 to 2148
bytes) including Header and CRC. Refer to
Size
more information on the frame size.
Note:
There is nothing to configure for
FC Framed Layer 1
and
FC Framed
Layer 2
.
3b.
Press
Next
.
