Pop-Up Windows
Ethernet and Fibre Channel Application
483
PBB-TE Interface configuration
PBB-TE Interface configuration
The PBB-TE Interface window allows to configure the source and
destination parameters for PBB-TE network testing capability. This pop-up
window is displayed when clicking on the
PBB-TE Config
button.
B-MAC Source Address
: Enter the
source Backbone MAC address.
The default address is the same as
the source MAC address.
B-MAC Destination Address
:
Enter the destination Backbone
MAC address. The default setting is
00:00:00:00:00:00
.
I-TAG
(Backbone Service Instance Tag)
SID
(Service Instance Identifier): Enter the I-TAG SID which identifies
the backbone service instance of the selected stream. Choices are
0
through
16777215
. The default setting is
256
.
Priority
: Select the B-VLAN user Priority Code Point (PCP). Choices are
0
to
7
. The default setting is
0
(
000
- Low).
Drop Eligible
: When the
Drop Eligible
check box is selected
(DEI = 1), these transmitted frames will be dropped first on receipt
when congestion occurs under test. This setting is disabled by default.
