Traffic Analyzer Tabs
Ethernet and Fibre Channel Application
197
FC Latency
FC Latency
Note:
Available with
FC Framed Layer 1
and
FC Framed Layer 2
only.
Press
TEST
,
Traffic Analyzer
, and
Latency
.
Latency is only available when the two following conditions are met:
Framed Layer 1 or Framed Layer 2 has been selected from the BERT
Configuration panel on both TX and RX Configuration.
The test pattern should be different than CRPAT, CSPAT, and CJTPAT.
Configuration
Latency Tag
: Allows Latency and Buffer-to-Buffer Credit
measurements when the
Latency Tag
check box is selected. The
Latency Tag
check box is cleared by default.
