Creating and Starting a Test Case
Ethernet and Fibre Channel Application
75
EtherSAM (Y.1564) Test Case
2.
Port configuration:
2a.
Select the port
Connector
Type (Optical
or
Electrical RJ-45
).
Optical
is automatically selected for the
Ethernet 10G
interface.
2b.
For IQS-8510B, select the
port number by pressing
on
Port 1
or
Port 2
.
2c.
For Electrical RJ-45, if
required, select the
Ethernet port
crossover
check box to inverse the
pin-to-pair assignment of the UTP cable used.
Note:
At this point you should have a link up indicated in the
Tree
view tab. A
green LED indicates a link up while a red LED indicates a link down. For
electrical port, if the link is down, make sure that the
Ethernet port
crossover
setting is correct.
2d.
Press
Next
.
