IPTV Tabs
290
IQS-8500 Series and IQS-8120NGE/8130NGE
IGMP
Select a stream from the list by pressing on it, or perform a search in the
stream list by entering either its
Stream Name
or
Destination IP Address
.
When entering a
Stream Name
or the
Destination IP Address
the search
is done immediately when pressing
OK
. After a search, the stream is
highlighted when found, otherwise the previous selection is kept.
Note:
The
Stream
field displays the name of the stream followed by “
Unicast -
IGMP Not Supported
” when the selected stream is a unicast IP address.
Management
Auto-Join
: Indicates for a multicast stream only that the auto-join
capability is enabled or disabled.
Join Status
: Indicates the join status for a multicast stream only. The
join status icons become gray when the test is stopped.
Enable Auto-Join
/
Join
button: This button toggles from
Enable
Auto-Join
to
Join
when the test is started.
Icon
Status
Description
Joining
The joining state is reported following a join
request until the desired stream is received or
the join timeout expires.
Joined
The joined state is reported when the desired
stream is received before the join timeout
expires.
Failed
The failed state is reported when the stream
remains undetected within the join timeout.
Idle
The idle state is reported initially for all multicast
streams that are not member of a group and
doesn’t have the failed status.
