manualshive.com logo in svg

EXFO IQS-8120NGE, User Manual

The EXFO IQS-8120NGE is a cutting-edge network testing solution that ensures optimal performance. Users can easily access the comprehensive User Manual for this product for free download from our website. This manual provides detailed instructions and troubleshooting tips to maximize the efficiency of the EXFO IQS-8120NGE.

Share
Download
background image

Index

516

IQS-8500 Series and IQS-8120NGE/8130NGE

Default Gateway Address Status ............... 490
Default Test Preferences ............................ 370
defect mode.............................................. 360
defined tab ................................................. 59
delay ......................................... 397, 503, 505
Delay Factor (ms) ...................................... 284
Delete.................................................. 69, 273
description ................................................ 378
Deselect All........................ 265, 272, 273, 277
Dest IP Address ................. 268, 271, 273, 276
Dest IP Address From ........................ 272, 274
Dest IP Address To............................. 272, 274
Dest Port ................................................... 268
Destination........................ 221, 296, 485, 498
destination ................................................ 226
Destination B-MAC Address ...................... 219
Destination IP Address ...................... 272, 274
Destination IPv6 Address........................... 491
Destination MAC Address.......... 175, 410, 498
DF_CTL ...................................................... 237
Dir. .................................................... 341, 344
Direction ................................... 322, 332, 348
Disable Auto-Join ...................................... 277
Disabled .................................................... 122
Disconnect .................................................. 87
Discovered................................................. 265
Discovered Topology ................................. 147

Fabric................................................... 147
Point-to-Point ...................................... 147

Discovery tab............................................. 262
Displayed Results308, 312, 316, 321, 324, 429, 

431, 433, 435

Displayed Step........................... 316, 323, 433
disruption count ....................................... 361
distribution ............................................... 300
Divider Ratio.............................................. 389
Drop Eligible ..................... 219, 482, 483, 484
DS ............................................................. 502
DSCP codepoints ....................................... 502
DTS connection failed ............................... 343
Dual Ports........................ 39, 90, 96, 103, 116
Dual Test Sets.................................. 74, 81, 90

DUPLEX ..................................... 12, 14, 20, 28
Duplex ....................................... 143, 155, 160
Duration .................................... 126, 132, 296
duty cycle .................................................. 216
Dying Gasp ................................................ 411

E

E1 .............................................................. 251
E2 .............................................................. 251
EB .............................................................. 364
EBS .................................................... 334, 348
EBS Test Time ............................................ 341
EC.............................................................. 364
ECN ........................................................... 502
Edit.................................................... 279, 393
EFS ............................................................ 364
EIR ..................................................... 334, 338
Elapsed Time ............................................. 296
electrical interface ..................................... 460
Electrical RX............................................... 136
Electrical TX ............................................... 134
EMIX

Quantity............................................... 496

Enable ............... 152, 180, 183, 203, 205, 206
Enable Advanced Auto-Neg. Mode............ 154
Enable Auto-Join ....................................... 276
Enable Auto-Negotiation........................... 143
enable auto-negotiation............................ 372
Enable DHCP.............................................. 112
Enable Differentiated Services ................... 502
enable Ethernet criteria ............................. 439
Enable Expert Mode .......................... 426, 436
Enable Local Capabilities ........................... 157
enable OAM .............................................. 405
enable pattern criteria ............................... 441
enable PLM-P............................................. 249
enable port criteria .................................... 437
enable sync.................................................. 99
Enable Test ................................................ 302
Enable TX - On/Off..................................... 204
enable UNEQ-P .......................................... 249

Summary of Contents for IQS-8120NGE



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IQS-8120NGE

FENDT 4300 Workshop Service Manual preview
4300
Brand: FENDT Pages: 31
Makita KP312 Operating Manual preview
KP312
Brand: Makita Pages: 8
VECTECH 190 Instruction Manual preview
190
Brand: VECTECH Pages: 5
Panasonic WJHD309A - DIGITAL DISK RECORDER Network Operating Instructions preview
WJHD309A - DIGITAL DISK RECORDER
Brand: Panasonic Pages: 79
ACCO Brands LOUDEN 200 Series Installation, Operation, Maintenance And Parts Manual preview
LOUDEN 200 Series
Brand: ACCO Brands Pages: 144
B&K 4416 Service Manual preview
4416
Brand: B&K Pages: 16
B&G H5000 Pilot Quick Reference Manual preview
H5000 Pilot
Brand: B&G Pages: 2
Eaton PowerXL DX-NET-ETHERNET2-2 User Manual preview
PowerXL DX-NET-ETHERNET2-2
Brand: Eaton Pages: 48
Eaton Power Xpert C445 Manual preview
Power Xpert C445
Brand: Eaton Pages: 2
Federal Signal Corporation Electraray 225 Instruction Sheet preview
Electraray 225
Brand: Federal Signal Corporation Pages: 12
Palmako Harry Assembly, Installation And Maintenance Manual preview
Harry
Brand: Palmako Pages: 83
Tascam CC-222SL Technical Documentation preview
CC-222SL
Brand: Tascam Pages: 3
Mako MK5 Operator'S Manual preview
MK5
Brand: Mako Pages: 17
Balluff BOS R254K-UUI-LH10-S4 Installation Manual preview
BOS R254K-UUI-LH10-S4
Brand: Balluff Pages: 12
Oase LUNAQUA Classic LED Operating Instructions Manual preview
LUNAQUA Classic LED
Brand: Oase Pages: 16
ABB HT614812 Operation Manual preview
HT614812
Brand: ABB Pages: 112
Xalingo 0986.5 Assemble Instruction preview
0986.5
Brand: Xalingo Pages: 2
KaVo INTRA PROPHYwiz 181 P Instructions For Use Manual preview
INTRA PROPHYwiz 181 P
Brand: KaVo Pages: 22

Brands by name

Popular brands

Load more brands