Creating and Starting a Test Case
74
IQS-8500 Series and IQS-8120NGE/8130NGE
EtherSAM (Y.1564) Test Case
To create an EtherSAM (Y.1564) test case:
1.
Test configuration:
1a.
Select
Ethernet 10/100/1000
or
Ethernet 10G
as the
Interface Type
.
Interface Type
is not available with
IQS-8510G.
1b.
Select
Single Port
as the
Topology
.
Topology is only available with
IQS-8510B.
1c.
Select the source
Clock Mode
.
Available with IQS-8510G only. Refer to
more information.
1d.
Select
EtherSAM (Y.1564)
as the
Application Type
.
1e.
Select the desired
EtherSAM
sub test(s). All
EtherSAM
sub tests
are selected by default. Refer to
information.
Service Configuration Test
consists in sequentially testing each
service. It validates that the service is properly provisioned and
that all specific KPIs or SLA parameters are met.
Service Performance Test
simultaneously validates the quality of
all the services over time.
1f.
Leave the
Dual Test Set
check box cleared. For Dual Test Set test
case, refer to
Ethernet EtherSAM (Y.1564) and RFC 2544 Dual Test
1g.
Press
Next
.
