Summary Tabs
122
IQS-8500 Series and IQS-8120NGE/8130NGE
Test Summary
Test Status
Start Time
: Indicates the date and time the test has been started. The
date and time reset every time the test is restarted. The default time
format is ISO (yyyy-mm-dd hh:mm:ss) unless otherwise set from the
Port Link
: Indicates the link status at the input port of the
Ethernet/Fibre Channel interface. A green LED indicates that the link is
up while a grey LED indicates a link down.
Expert Mode Verdict
: Indicates the status of the expert mode. This
information is only available with
RFC 2544
and
BERT
Ethernet tests.
Pass
is declared if all results values meet the configured criteria.
Fail
is declared if any result value does not meet the configured
criteria.
--
is displayed when at least one of the following conditions is met:
- the
Expert Mode
is disabled.
- there is no defined criterion.
- for
RFC 2544
test, when the specific test did not run yet.
- for
BERT
test, when the test is still running or didn’t run yet.
Disabled
is displayed with
RFC 2544
test when a specific test
(
Throughput
,
Back-to-Back
,
Frame Loss
, or
Lantency
) has its Expert
mode’s
Enable Criteria
check box cleared.
Global Verdict
for
EtherSAM
test: Indicates the actual test
PASS
or
FAIL
verdict. A
FAIL
verdict is declared when a
Link Down
,
LOS
, or any
SLA parameter fails during the test.
