Creating and Starting a Test Case
Ethernet and Fibre Channel Application
81
Ethernet EtherSAM (Y.1564) and RFC 2544 Dual Test Set Test Cases
To create an EtherSAM (Y.1564) or RFC 2544 Dual Test Set test
case, first create the test on the remote module as follow:
1.
Test configuration:
1a.
Select
Ethernet 10/100/1000
or
Ethernet 10G
as the
Interface Type
.
Interface
Type
is not available with
IQS-8510G.
1b.
Select
Single Port
as the
Topology
. Topology is only
available with IQS-8510B.
1c.
Select
EtherSAM (Y.1564)
or
RFC 2544
as the
Application Type
.
1d.
Select the
Dual Test Set
check box to enable the control of a
remote compatible module (IQS-8510B, IQS-8510G,
IQS-8525/IQS-8535, IQS-8120NGE/IQS-8130NGE, or
RTU-310/RTU-310G). For IQS-8510B,
Dual Test Set
is only
available in Single Port
Topology
. This setting is not selected by
default.
1e.
Select the
Remote
test
Mode
.
1f.
Type an ID for this remote unit. Up to 16 characters are allowed.
1g.
For IQS-8120NGE and IQS-8130NGE, select the latency
measurement mode;
Round-Trip
or
One-Way
. For more
information, refer to
on page 329 for EtherSAM.
1h.
Press
Next
.
