Creating and Starting a Test Case
Ethernet and Fibre Channel Application
107
Ethernet Frame Analyzer Test Case
5.
Traffic stream configuration:
5a.
Select the traffic stream to be configured, then set its parameters.
Up to 10 streams can be configured with
Frame Analyzer
test.
5b.
For IPv4, select the
Automatic IP Address
check box to
dynamically obtain an IP address from a DHCP (Dynamic Host
Configuration Protocol) server or set the source and destination IP
addresses,
Subnet Mask
, and the
Default Gateway
on page 485 for more information.
5c.
For IPv6, set the destination IP address and if required, press the
IPv6 Config
button for additional IPv6 settings. Refer to
on page 487 for more information.
5d.
If required, set the network source MAC Address. Select the
Resolve MAC Address
check box or set the destination MAC
address. Refer to
on page 220 for more information.
5e.
Select the
Frame Format
. Choices are
Ethernet II
and
802.3 SNAP
. Refer to
information.
IPv4
IPv6
