System Tabs
376
IQS-8500 Series and IQS-8120NGE/8130NGE
FC Test Preferences
FC Test Preferences
Note:
Not available with IQS-8510G.
Press
System
and
Preferences/FC Test Preferences
.
For IQS-8510B
For IQS-8120NGE/IQS-8130NGE and IQS-8525/IQS-8535
Allows setting the default test parameters that will be applied every time a
test is created manually using
Test Setup
. Changes to the default test
preferences will only apply when a new test case is created. The default
test preferences can be overwritten by the test setup configuration.
Note:
The default test preferences are saved per slot on the IQS-600 meaning that
the configuration will not follow the module when changing the module
from one slot to another. However, a configuration on a specific slot will
remain when replacing a module by another module of the same model.
