Pop-Up Windows
Ethernet and Fibre Channel Application
485
IPv4 Configuration
IPv4 Configuration
Source
Note:
For EtherSAM Dual Test Set, the source IP address is only configurable
through the Network
Automatic IP Address
:
Allows to dynamically obtain
an IP address from a DHCP
(Dynamic Host
Configuration Protocol)
server.
IP Address
: Enter the IP
address for the selected
service. The default setting is
10.10.x.x
, where
x
and
y
are respectively
the two least significant bytes of the port default MAC address.
Subnet Mask
: Enter the Subnet Mask for the selected service. The
default setting is
255.255.0.0
.
Destination
IP Address
: Enter the destination IP address for the selected service.
Ping
button: Press
Ping
to automatically start the quick Ping utility for
the service destination IP address using the Ping parameters from the
on page 504 for more information.
Default Gateway
: Enter the default Gateway IP address. Enable Default
Gateway must be activated to enable the Default Gateway IP address
field. The default setting is
0.0.0.0
.
Enable
: Allows enabling the
Default Gateway
.
