Port Tabs
Ethernet and Fibre Channel Application
155
Advanced Auto-Neg. TX
Configuration
The
Speed
,
Duplex
, and
Flow Control
can be modified only when the
Enable Local Capabilities
is disabled.
Speed
: Select the speed of the connected interface. Choices are:
For electrical port:
10Mbps
,
100Mbps
,
1Gbps
, and
Auto
.
For optical port:
1Gbps
.
Duplex
: Select the duplex mode for the selected port. Choices are:
For 10 Mbps and 100 Mbps speeds (except for
BERT
and
Smart
Loopback
tests):
Full
,
Half
, and
Auto
.
For 1Gbps speed,
BERT
or
Smart Loopback
:
Full
.
Flow Control
: Select the flow control of the connected interface. The
default setting is
None
. Choices are:
None
: Pause frame received are ignored and no pause frame are
transmitted.
None
is the only choice for
BERT
and
Smart Loopback
tests.
Asymmetrical
: Pause frame can be transmitted but not received.
Symmetrical
: Pause frame can be received and transmitted depending
on the link partner (L. P.) flow type (see table below).
Asym. and Sym.
(Asymmetrical and Symmetrical): pause frame can be
received and/or transmitted depending on the link partner (L. P.) flow
type (see table below).
Auto
: Allows the negotiation of the flow control with the partner port.
