Pop-Up Windows
488
IQS-8500 Series and IQS-8120NGE/8130NGE
IPv6 Address Configuration
Global IPv6 Address
The Global IPv6 Address (GUA) is used for global communication with
hosts outside the subnet and to communicate with on-link neighbors.
Mode
None
disables the
Global IPv6 address
and the
Default Gateway
address
.
Stateless Auto
allows automatic generation of the IPv6 address
based on the MAC address and the prefix obtained from router
advertisements. If no prefix has been obtained, the Global address
will not be generated. The mode
Stateless Auto
is selected by
default.
Static
allows to enter the IP address. The default address is
2001::[Interface ID]
, where
[Interface ID]
is generated from the
source MAC address.
Interface ID Coupled
: Available when the
Static Mode
is selected, it
allows to couple the interface ID of the Global address to the Link-local
source address. The Global address interface ID will match the
Link-local address interface ID. The
Interface ID Coupled
check box
is selected by default.
Prefix Mask
: Available when the
Static Mode
is selected, it allows to
specify a prefix that defines the subnet. For example:
Note:
The prefix mask must be a series, from left to right, of consecutive binary
1’s followed by consecutive 0’s.
Global Address
2001:0DB8:0001:0002:02AA:00FF:FE11:1111
Prefix Mask
FFFF:FFFF:FFFF:0000:0000:0000:0000:0000
Corresponding Prefix
2001:0DB8:0001
