Tools Tabs
396
IQS-8500 Series and IQS-8120NGE/8130NGE
Ping Configuration
Ping Configuration
The Ping tool is used to determine if a network device is reachable. Ping is
not available when no test is created.
Press
Tools
,
Ping
,
Configuration
, and in the
Tool
list, press
Ping
.
Note:
For
Trace Route
Setup
IP Address/IPv6 Address
: Enter the IP address of the network device
to be detected. The IP address version is as per the version selected
during the test setup.
Run
: Press
Run
to start the
Ping
command.
Configuration
Timeout (ms)
: Enter the maximum time allowed between an ICMP
echo and response. Choices are
200 ms
to
10000 ms
. The default
setting is
4000 ms
.
