Tools Tabs
Ethernet and Fibre Channel Application
401
Trace Route Configuration
Trace Route Configuration
Trace Route is used to obtain the list of all routers identified between the
local port (IQS-8500 Series and IQS-8120NGE/8130NGE) and the destination
IP port.
Press
Tools
,
Configuration
, and in the
Tool
List, press
Trace Route
.
For
Ping
Setup
IP Address
: Enter the IP address of the network device to be detected.
The IP address version is as per the version selected during the test
setup.
Run
: Press
Run
to start the
Trace Route
command.
Configuration
Timeout (ms)
: Enter the maximum time allowed between an ICMP
echo and response at each hop. Choices are
200 ms
to
10000 ms
. The
default setting is
4000 ms
.
Max Hop Count
: Enter the maximum network device the packet is
allowed to go through. Choices are
1
to
255
. The default setting is
128
.