Creating and Starting a Test Case
Ethernet and Fibre Channel Application
69
Introducing the Test Setup
Test Setup Controls
:
Back
returns to the previous configuration step allowing to see,
change or delete what had been selected.
Next
switches to the next configuration step. The
Next
button is
only available when selection(s) from the Data Path Selector
and/or the Grid has been made.
Delete
deletes the current path node.
Finish/Setup
:
Finish
completes the configuration and creates the test case. The
current window settings are only accepted if the selection has
been made from the
Grid
view. Default parameters will be used
for the remaining wizard steps. Thus, pressing
Finish
for BERT test
will automatically add a pattern at the end of the test case structure
if not already selected.
Setup
is displayed instead of
Finish
once the test is created
allowing to return in setup mode.
Setup
is not available when the
test is started (running).
