RFC 2544 Tabs
314
IQS-8500 Series and IQS-8120NGE/8130NGE
Frame Loss
Configuration
Test Time (MM:SS)
: Select the test time value. Possible values are
1
second to
30
minutes. The default setting is
1
second (00:01).
Test Granularity (%)
: Select the test granularity. The test granularity is
the percentage interval between each throughput value used for the
test. For example, 10% granularity means that the test will be
performed for 100%, 90%, 80%... of the throughput value. Choices are
1
to
10%
(RFC). The default setting is
10%
.
Nb of trials to average
: Select the number of times the test will be
generated. Choices are
1
to
50
trials. The default setting is
1
trial.
Maximum Rate
TX-to-RX/P1-to-P2/P2-to-P1
/
Local to Remote
/
Remote to Local
: Select
the maximum rate for the test. The default setting is
100 %
for
10/100/1000Mbps and 10Gig-E LAN, and
92.8571428571429%
for
10Gig-E WAN. P1-to-P2/P2-to-P1 is only available with IQS-8510B.
Select the rate’s unit. Choices are
%
, and
Mbps/Gbps
. The default
setting is
%
.
Unit
Interface
Rate
from
to
%
10Base-T
100Base-T
1000Base-T/X
10Gig-E LAN
10Gig-E WAN
1
1
1
1
1
100
100
100
100
92.8571428571429
Mbps
10Base-T
100Base-T
1000Base-T/X
0.1
1
10
10
100
1000
Gbps
10Gig-E LAN
10Gig-E WAN
0.1
0.1
10.0
9.2857142857142865
