6 Operation
Wellenlötanlage CIG highspeed SIG
DOK-002
6-20
1. Enter a value for the target temperature of the solder bath in the
T
ARGET TEMPERATURE
field (1).
►
Standby 1 is the speed at which the pump motors transport the sol-
der to the solder nozzle when there is no printed circuit board or
frame in the system. Set the value so that the waveforms are filled
with solder but not overflowing.
1. Enter a speed percentage value in the
W
AVE
1/S
TANDBY
1
field (2).
2. Enter a speed percentage value in the
W
AVE
2/S
TANDBY
1
field (2).
How to enter the target temperature of the solder bath
The solder bath is automatically heated to the set value. The cur-
rent solder bath temperature is displayed in the
A
CTUAL TEMPERATURE
field (a).
How to set standby 1
The speeds are controlled automatically according to the values
that have been entered.
2
1
3
4
6
5
a
2
3
4
