epm
Structure and Function
September 2007 Edition
Operating Manual CIG compact TMS DuplexAutomatic Soldering Machine
Page 3-21
3.7.3 PC Controller with MIS Management Information System
All the function parameters are programmed through the Management Information System
(MIS Software). All the menus are easily accessible and clearly arranged. The parameters
are input at the Personal Computer via the keyboard with trackball. The programming can
be performed while the production is ongoing. All switch-on and switch-off points can be
displaced. Soldering logs can be printed with an additional printer. An exact description of
the software and the programming processes can be seen in Chapter 5.
The PC is located at operator height and is easily accessible on the PC arm.
Fig. 3-19. PC controller
3.7.3.1 Printer
Soldering logs and machine parameters can be printed with a printer.
3.7.3.2
Maintenance Software "UPTIME" (Optional)
The maintenance work can be regulated in an optimum manner with the maintenance soft-
ware.
