6 Operation
Wellenlötanlage CIG highspeed SIG
DOK-002
6-36
►
Batch management is not available if there is a printed circuit board
or frame inside the machine. Remove printed circuit boards and
frames from the machine.
Fig. 6-24: "Automatic coding" window
1. From the program list (1), select a program to which you would like
to link the new batch. The program number for the selected pro-
gram appears in the
P
ROGRAM
field (b).
2. Enter a name for the batch in the
B
ATCH NAME
field (3).
►
As an alternative to steps 3 to 7, it is also possible to manually enter
a barcode into the
C
ODE
field (4).
3. Touch
S
CAN
(5). The barcode reader starts.
4. Scan the barcode for the new batch. The batch barcode appears in
the
S
CAN
field (c).
5. Check that the scan is correct.
6. If the barcode has been scanned correctly, touch
S
ET SCAN
(9). The
barcode appears in the
C
ODE
field (4).
7. Check that the barcode is correct.
8. Touch
C
REATE BATCH
(6).
►
If you do not use consecutive serial numbers, batch creation ends.
Otherwise, continue with step 9.
9. Touch
I
GNORE POINTS
(8).
How to create a batch
1
2
3
4
7
8
9
10
5
b
6
c
