September 2007 Edition
Installation
epm
Page 4-28
Operating Manual CIG compact TMS DuplexAutomatic Soldering Machine
Composition of solder
Kind of solder
Solder bath
Sn /Pb % %
Lead free Normal
Range
Wave 1
Value %
Load
%
Wave 2
Value %
Load
%
Standby 1
0 – 100%
Standby 2 (solder level values)
0 – 100%
Wave 1 and 2
70%
70%
Wave 1 and 2
80%
80%
Wave 1 and 2
90%
90%
Heating elements
Default
Actual
Additional left
2A
1 from left
3,5A
2 from left
4A
3 from left
4,5A
Additional right
2A
1 from right
3,5A
2 from right
4A
3 from right
4,5A
Calibration
Range
Calibrate temp.
Solder bath temp.
0 - 300°C
Wave 1
Gap (print/wave):. mm
Parallel:.
Wave 2
Gap (print/wave):. mm
Parallel:.
Woerthmann wave 2 (optional)
Lengthways:. mm
Range of holes 3/5:.
Distance between both waves (mechanical)
70mm
140mm
Motor plugs type:
Metal / pins Metal / screw
Plastic
Normal wave1 and 2
Lengthways:. mm
Solder level motor run 1min
Solder refill time Sec. New sensor N°4551
Alarm lamp yellow after 7 X 1min.
Alarm lamp red after 10 X 1min.
Machine without solder refill only with sensor
Solder bath with body coat treatement
Distance between ring and top of floating device: mm Refill motor new position
Notes:
Type / Version / Model / software
Serial N°
Pyrometer
Calibration
Range
Calibrate temp.
Pyrometer readout
80°C to 130°C
Cooling system N2
0,3 0,5 bar
Interface dil-switch position
ON:N° OFF:N°
Set points and functions tested Flap over pyrometer
Notes:
