6 Operation
Wellenlötanlage CIG highspeed SIG
DOK-002
6-47
Opening the window
Touch
E
XTRAS
(30) in the Settings window (see '"Settings" window' on
page 6-43). The "Extended settings" window appears.
Fig. 6-35: Extended settings window
It is possible to activate the following functions and set parameter val-
ues in the "Extended settings" window:
1 Activate automatic speed adjustment
2 Activate additional transport monitoring
3 Set pulses/meter
4 Set external transport delay time for when the operating mode
switches to "Pause" or "Sleep" (see 'How to change the operating
mode' on page 6-8)
5 Activate flap control
6 Set reading time for the barcode reading device
7 Set flap opening time if PPM is too low
8 Set checking interval if PPM is too low
9 Set flap group to be opened if PPM is too low
10 Activate automatic pump speed control for wave 1
11 Set highest frequency of the pump speedometer at wave 1
12 Activate automatic pump speed control for wave 2
13 Set highest frequency of the pump speedometer at wave 1
14 Set permissible waiting time that may elapse between reaching the
target temperature and enabling the system
15 Activating error codes
►
Unidentifiable frames or PCBs that are processed in the system re-
ceive error code "0000".
3
7
8
9
4
5
6
2
1
12
17
18
19
14
15
16
11
10
13
22
21
20
23
