multi EA 4000
Operation
93
Figure 46 Components for connecting the TIC reactor and ceramic tube
1 Base element of the gas sluice
(in the Figure with black sealing ring for the pressure
ring)
2 Pressure ring
3 Sealing rings
4 Knurled ring
The gas connection at the base element (1 in Figure 46) remains unattached during
measurements with the automatic TIC solids module. The base element and pressure
ring (2) are screwed together gas-tight to prevent ambient air entering the system or
measuring gas escaping at this point.
1.
Assemble the components of the coupling for connect-
ing the ceramic tube and TIC reactor.
Only tighten the knurled ring (4 in Figure 46) slightly.
2.
Fit the coupling with 3 hexagon socket screws on the
right-hand side of the multi EA 4000.
3.
Slide the duct trap onto the ceramic combustion tube.
Insert the ceramic tube with dust trap into the multi
EA 4000 through the opening on the left-hand side.
Align the dust trap with the gas connection pointing
up.
4.
Attach the measuring gas hose (hose no. 1) to the
dust trap.
Summary of Contents for Analytik Jena multi EA 4000
