Endress+Hauser Analytik Jena multi EA 4000, Operating Manual

Page: 149 / 151

multi EA 4000 Specification
149
11 Specification
11.1 Technical data
General characteristics
Designation/type Analyzer multi EA 4000
Dimensions Basic device (W x H x D) 600 x 470 x 620 mm
each module: 300 x 470 x 550 mm
Autosampler: 520 x 500 x 700 mm
Mass approx. 35 kg
each module approx. 8 kg
Autosampler approx. 20 kg
Procedural data
Digestion principle oxidative combustion
Digestion temperature dependent on application 1000 – 1500 °C
(lower temperatures also possible)
Measuring methods TC, TIC, TOC, TS, EC, TCl
C and S detection NDIR (coupled with VITA method)
Cl detection Coulometry
Sample volume up to 3000 mg
Sample Feed Weighing in porcelain or quartz glass boats
Automatic sampler or manual feed
Gas supply Oxygen min. 2.5 and argon 4.6
with inlet pressure 200 – 400 kPa (29 – 58 psi)
Control/analysis (control and anal-
ysis software multiWin) Real-time graphics, status indication during analysis,
graphical display of the measured results,
result print-out
Electrical variables
Furnace module HTS1500 connec-
tion 200 – 240 V AC (+ 10 %, -5 %), 50 – 60 Hz
Module and
sampler connection 100 – 240 V AC (±10 %), 50 – 60 Hz
Man. TIC solids module 220 – 240 V AC (±10 %), 50/60 Hz
(100 V AC / 115 V AC upon request)
Fuses HTS1500 furnace module
Device control: T 2 AH
Heating: Circuit breaker type B16
The fuses are inside the device and may only be re-
placed by the customer service of Analytik Jena AG!
C/S module 2 x T 4.0 AH
Cl module 2 x T 4.0 AH
Only use original fuses by Analytik Jena AG!