Commissioning
multi EA 4000
64
Position 1
1.
Switch on the basic device, the detector with control unit, the automatic TIC solids
module, where applicable, and the FPG 48. Start the multiWin software and initial-
ize the analyzer.
2.
Select the menu command S
YSTEM
S
AMPLER
A
LIGNMENT
. A window with the same
name opens.
3.
Place the adjustment aid into the boat position to be ad-
justed on the rack (here position 37).
4.
Select the option P
OSITION
1 from the list and click on [A
D-
JUST
P
OSITION
]. The sampler arm moves above the left-hand
boat position.
5.
Check that the gripper is centered above the opening of
the adjustment aid and can enter the opening without ob-
struction. Correct the alignment in the x and y directions
using the arrow keys where necessary.
For coarse adjustment, select a z value of 350, for fine ad-
justment values of 450-550. This prevents the gripper im-
pacting hard with the autosampler. Check the changes by
clicking on [A
DJUST
P
OSITION
].
6.
Adjust the lowering depth of the gripper.
Click again on [A
DJUST
P
OSITION
]. Remove the adjustment
aid when the autosampler returns to its start position.
7.
Using the slider H
IGHER
/
L
OWER
adjust the lowering depth
of the gripper and set the new position by clicking on [A
D-
JUST
P
OSITION
].
Summary of Contents for Analytik Jena multi EA 4000
