multi EA 4000
Safety instructions
11
2.2
Technical condition
The analyzer corresponds in its design and construction to the current state of the art
technology. Unauthorized modifications or changes, especially such that affect the
safety of the staff and the environment, are generally not allowed.
Any manipulation of the safety equipment is prohibited! In case of an accident, ma-
nipulations of the safety equipment will be interpreted as deliberate!
The operator must only operate the analyzer in a sound and operationally safe con-
dition. The technical condition must always comply with the legal requirements and
regulations.
Prior to every use, the analyzer must be checked for damage and sound condition.
Any changes in the analyzer affecting its safety must be reported by the operating
personnel to the operator immediately.
The equipment components must only be connected to supply cables intended and
designed for this purpose.
All safety equipment and interlocks must be well accessible and regularly checked
for proper operation.
2.3
Requirements for the operating personnel
The analyzer multi EA 4000 must only be operated by qualified specialist personnel in-
structed in the use of the analyzer. The instruction must also include conveying the
content of this user manual and the user manuals of other system components or add-
on equipment.
The analyzer may pose dangers if it is not used by trained personnel, improperly or
other than intended.
Therefore, every person tasked with the operation of the analyzer must have read and
understood this user manual and the user manuals of any additional equipment before
carrying out the respective tasks. This also applies if the respective person has already
worked with or been trained on this kind of analyzer.
It is recommended that the operator have the operating personnel confirm the
knowledge of the content of the user manual in writing. The ultimate responsibility for
the accident-free operation of the analyzer rests with the operator or the specialist
personnel authorized by him.
In addition to the safety at work instructions in this user manual the generally applica-
ble safety and accident prevention regulations of the respective country of operation
must be observed and adhered to. The operator must ascertain the latest version of
these regulations.
The user manual must be accessible to the operating and service personnel at any
time!
The following has to be observed:
The analyzer must only be commissioned, operated and serviced by trained person-
nel instructed in technical safety.
Summary of Contents for Analytik Jena multi EA 4000
