58
System settings via touch display
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
3.4.6. No-touch action
This action determines what is to happen if no setting is entered on the display for 5
minutes.
Settings > system > screen
Confirm with
OK
to save and return to the previous menu selection.
Or cancel using the
skip back arrow
or the
house button
.
3.5.
Ambient lighting
The
Display Corlo Touch KNX
has LEDs installed which are directed to the side from
behind the frame. This ambient lighting can be adjusted in terms of colour and
brightness. The lighting may be adapted in the menu
Settings > system > ambient lighting
The menu can be secured with an access code.
Access codes for display menus
If you switch the automatic return to the
starting screen
ON
, the display returns to
that if it isn't touched for 5 consecutive
minutes.
If you switch it
OFF
, the display shall remain
on the selected screen until a key is pressed.
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
