105
Automatic functions
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Due to the "change to manual mode if the feedback value does not correspond to the
set point value", changes caused by external switches are still registered in the system.
Set the parameter to "yes", if all actuators of this channel are to be set to "manual", if
the object "AutoX ... feedback" does not correspond to the set point value. This means
that the automatic mode is inactive until the next automatic reset.
It is therefore advisable to set the parameters to "no" if many actuators are controlled
via this channel. In this case, the information about "manual/automatic" should be
processed by each actuator individually.
Several objects allow an external evaluation and use of the shade status.
The safety object links frost, wind and precipitation alarm with OR.
"Use with alarm object: Yes" activates separate objects for frost, wind and precipitation
warnings.
Blocking object value before 1st
communication
0 • 1
Action after locking
• Execution of last automatic command
• Waiting for next automatic command
Switch to manual if feedback value
deviates from automatic set point value.
Objects no. 636/667/702/737/772
"AutoX ... feedback"
No • Yes
Use status objects for indoor/outdoor
temperature
blocks
Objects no. 625/660/695/730/765 "AutoX ...
Status indoor temperature lock"
Objects no. 626/661/696/731/766 "AutoX ...
Status outdoor temperature lock"
No • Yes
Use safety object
Objects no. 617/652/687/722/757
"AutoX ... Safety"
No • Yes
Use alarm objects
Precipitation alarm objects no. 618/653/688/
723/758 "AutoX ... Rain alarm"
Wind alarm objects no. 619/654/689/724/
759 "AutoX ... Wind alarm"
Frost alarm objects no. 620/655/690/725/760
"AutoX ... Frost alarm"
No • Yes
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
