133
Additional settings (ETS)
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Input as selector switch:
If a button with switch function is assigned to the input, select the bus function
"Selector switch" and specify if the button should switch when pressed/released..
Input to shutter, blinds, awning or window control:
If the input to the drive control is used via the bus, select the bus function "shutter",
"awning", "blinds" or "window" and specify the button function and control mode.
* For further details about settings, please see
Control modes for drive control
Input as dimmer:
If the input is used as a dimmer, select the bus function "Dimmer" and specify the
button function, time interval (switching/dimming) and if requested, the repeat interval
for a long button press.
Bus function
Selector switch
Command when pressing the button
• selector switch
• do not send telegram
Command when releasing the button
• selector switch
• do not send telegram
Function
Shutter / blinds / awning / window
Button function
Up • Down
Up • Down • Up/
Down
On • Off • On/Off
Open • Closed •
Open/Closed
(shutter)
(blinds)
(awning)
(window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man's switch
Function
Dimmer
Button function
brighter • darker • brighter/darker
Time between switching and dimming
(in 0.1 s)
1...50; 5
Repeat the dimm command
no • yes
Repeat the dimm command
for a long button press
(if dimm command is repeated)
every 0.1 s • every 2 sec; every 0,5 sec
Dim by
(if dimm command is repeated)
1,50% • 3% • 6 % • 12,50% • 25% • 50%
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
