57
System settings via touch display
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Confirm with
OK
to save and return to the previous menu selection.
You can save using
OK
at any time, or cancel using the
skip back arrow
or the
house button
without saving.
3.4.5. Start display
The start display determines which screen is shown on the display when you press the
house button (and after a reset).
Settings > system > screen
Confirm with
OK
to save and return to the previous menu selection.
Or cancel using the
skip back arrow
or the
house button
.
If you are using an image from an SD card as
your screen saver, you can select the image
number.
Scroll to the desired image number using
the +/- buttons on the rocker.
All display screens defined in the ETS may
be used as the starting screen.
Scroll to the desired start display screen
using
the +/- buttons on the rocker.
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
