54
System settings via touch display
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Scroll to the desired setting using the arrow keys on the rocker.
Then use the
Next
key (bottom right) to skip to the next setting.
Then use the
Next
key (bottom right) to skip to the next setting.
Scroll to the desired setting using the arrow keys on the rocker.
Then use the
Next
key (bottom right) to skip to the next setting.
The screen brightness may be set to a
•
fixed value (setting
OFF
).
•
Setting using the internal brightness
sensor (setting
according to room
brightness
).
•
Setting
via the KNX bus
(this
setting can only be selected if pre-set
in the ETS).
If the brightness value is fixed and the
control is done via the KNX bus, brightness
(or start brightness) can be set in percent.
Scroll to the desired setting using the +/-
buttons on the rocker.
If you are using a fixed brightness value and
control according to room brightness, you
may also set an automatic switch off.
This automatic switch off darkens the
display after the pre-set waiting time.
The automatic switch off may be
•
set to OFF
.
•
set to ON
.
•
switch off
if room dark
.
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
