Elsner Corlo Touch KNX 70258, Installation And Operation Manual

Page: 16 / 144

14 Description
Display Corlo Touch KNX • Status: 09.03.2017 • Technical changes and errors reserved.
1.5. Maintenance and care
Fingerprints on the glass area and frame are best removed with a cloth moistened with
water or a microfiber cloth. Do not use an abrasive cleaning agent or aggressive
cleansing agents.
For cleaning of the screen, the „cleaning mode“ can be used, that is activeted via the
display.

Settings > Cleaning Mode
During a period set in the ETS, the touch function is disabled then and the screen can
be cleaned.
1.6. Load individual images
1.6.1. Images for screensaver
The setting of the screen saver is described in the manual chapters

2.4. Display (ETS) and 3.4.4. Screen saver (Display)
Images that are shown as the screensaver must be stored on a micro SD card. In order
that the system can recognize the SD card, carry out a reset in the menu after inserting
it
Settings> System > Reset
This is not necessary if the card was inserted before booting the system. The card must
remain in the device.
Store images in the given size in a corresponding folder on the top level of the SD card:
Image type Resolution File format Folder name
Images for slide show 320 × 240 pixels .jpg (RGB mode) slideshow
Images for
individual image
display 320 × 240 pixels .jpg (RGB mode) diafix