61
System settings via touch display
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
3.5.2. Colour
Settings > system > ambient lighting
Scroll to the desired setting using the arrow keys on the rocker.
Then use the
Next
key (bottom right) to skip to the next setting.
The colour may be set to a
•
fixed value which is
set via RGB
(%)
•
fixed value which is
set via the
colour wheel
•
Adapted to the logo colour (
as logo
illumination
).
•
Setting
via the KNX bus
(this
setting can only be selected if pre-set
in the ETS).
If you set a fixed colour value
via RGB
, use
the keys for red, green and blue to adapt the
values with +/-. You can see a colour
preview in the bar on the right.
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
