40
System settings via ETS
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
The ambient lighting menu on the display can be secured with an access code that is
determined (or deleted) in the ETS.
The illumination
brightness
may be set to a fixed value, or controlled in % via object
no. 22 "ambient lighting brightness in %", or automatically adapt to the display, the
illuminated logo or the brightness of the room. The internal brightness sensor is used
for controlling the ambient lighting in correlation with room brightness.
The
automatic shut down
switches the ambient lighting off after the pre-set waiting
time. The deactivation can also be linked to the surrounding brightness via the setting
"if room is dark".
The
colour
of the lighting can be set to a fixed value, be controlled via objects 23-26
or automatically adapt to the illuminated logo. The colour is mixed from the RGB
range, i.e. the percentage of red, green and blue light is determined.
The colour can be modified via objects no. 23-25 "ambient lighting shares red/green/
blue in %" or no. 26 "ambient lighting RGB" via the bus (depending on the parameter
setting "RGB shares are set via ..."). The objects are input and output simultaneously, and
thus may both receive a command or transmit the status to the bus autonomously.
This means that, for example, the colours of several illuminations in a building may be
controlled by a "master".
Transfer the following parameters
Yes • No
Access code
(8 digits from 0 to 9)
[free text]
An empty field means that no code query is
done
Brightness
Object no. 22 "ambient lighting"
Brightness in %
• adjust to display brightness
• adjust to logo brightness
(see logo illumination)
• adjust to room brightness
• has a fixed value
• controlled by means of an object
(only if ambient lighting objects are used)
(start) value in %
only for fixed value/object control
0...100; 100
Automatic shut-down
not when settings are made via objects
• On
• Off
• If Room Dark
Waiting time
5 s • ... • 1 min • ... • 2 h
Colour
Objects no. 23-25 or no. 26)
• adjust to logo lighting
(see logo illumination)
• can be set via objects
(only if ambient lighting objects are used)
• has a fixed setting
Red in %
0...100; 100
Green in %
0...100; 100
Blue in %
0...100; 100
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
