108
Automatic functions
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Select the
movement position
for automatic mode. In case of shutters, you might
also select the slat setting and determine whether the slats are to follow the position
of the sun. If so, we distinguish between four elevation areas which are each assigned
a percentage of slat position.
If the shade conditions are no longer met (brightness etc), the movement position may
be modified after the "short" retraction delay is completed. The shade is only retracted
all the way after the "long" retraction delay is completed.
The
interior temperature block
enables the use of solar energy to warm the room.
If the indoor temperature is, for example, under the set value in the morning, the
shades remain retracted despite the sun. As soon as the set indoor temperature is
exceeded, the block is lifted and the shade released.
less than (in °)
only for angle range
0...360
Sun elevation
• Any height
• Angle range
greater than (in °)
only for angle range
0...90
less than (in °)
only for angle range
0...90
Movement position (in %)
0...100
Slat position
only for shutters!
• Does not track the sun
• Tracks the sun
Slat position (in %)
without following the sun position
0...100; 75
Sun elevation:
following the sun position
Slat position (in %):
0° - 15°
0...100
15° - 30°
0...100; 80
30° - 45°
0...100; 65
45° - 90°
0...100; 50
Change movement position
after "short" retraction delay
No
• Yes
Position (in %)
only in case of modification by
after "short" retraction delay
0 ... 100
Modify slat position
after "short" retraction delay
only for shutters
No
• Yes
Position (in %)
only in case of modification by
after "short" retraction delay
0 ... 100
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
