66
System settings via touch display
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Scroll to the desired setting using the arrow keys on the rocker.
Confirm with
OK
to save and return to the previous menu selection.
Or cancel using the
skip back arrow
or the
house button
.
3.8.
Timer
16 periods may be defined on the timer of the
Corlo Touch KNX
. Those periods are
then allocated to the internal automatic functions such as, e.g. the timed closure of
blinds.
Periods must be pre-set in the ETC menu "weekly timer: period". Periods configured
as outputs may also be modified on the display. Periods configured as inputs only
receive the time settings from another time in the bus system. Only the name of the
input periods is displayed, it is not possible to modify the settings.
Periods may be viewed or modified in the menu
Settings > system > timer
The menu can be secured with an access code.
Access codes for display menus
Select the symbol to be displayed in case of
alarm. All the icons of the system are
available.
Additionally, custom symbols may be saved
on the SD card and then loaded. For further
information please refer to chapter
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
