50
System settings via touch display
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
Before the system can be used, you have to have the basic configuration set up by the
integrator in the KNX software ETC. Afterwards, some system settings may be
modified directly on the display:
•
System language
•
Editable text language
•
Display
•
Ambient lighting
•
Log lighting
•
Button tone
•
Alarm
•
Timer
•
Alarm
•
Service
You can call up the system settings via the tool symbol on the display screens.
The symbol can be set to "visible" or "hidden" when the display screens are adapted.
If you want to allow system modifications on the display, the symbol must be shown
on at least one screen.
The
skip back arrow
takes you back to the previous menu screen without
saving.
The
house button
takes you back to the standard screen without saving.
3.1.
Access codes for display menus
The ETS may be used to determine access codes for the individual menus. Before the
menu is displayed, the code has to be entered on a keypad.
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......