Elsner Corlo Touch KNX 70258, Installation And Operation Manual

Page: 143 / 144

141 Additional settings (ETS)
Display Corlo Touch KNX • Status: 09.03.2017 • Technical changes and errors reserved.
Block:
Enter the behaviour, the value before 1st communication and the blocking action.
The setting options for the release behaviour depend on the parameter value
"switching output sending ..." (see "switching output")
Transmit behaviour • on change of logic
• on change of logic to 1
• on change of logic to 0
• on change of logic and periodically
• on change of logic to 1 and periodically
• on change of logic to 0 and periodically
• on change of logic+object receipt
• on change of logic+object receipt
and periodically
Transmit cycle
(if transmitted periodically)
5 s • 10 s • ... • 2 h
Evaluation of the blocking object • 1 = block | 0 = release
• 0 = block| 1 = release
Blocking object value before 1st
communication 0 • 1
Behaviour of the switching output
On block • do not transmit message
• transmit value for logic = 0
• transmit value for logic = 1
On release
(with 2 seconds release delay) [Dependent on the "Switching output
transmits" setting]
Switching output transmits on change • do not transmit message
• transmit value for current logic status
Switching output transmits on change to 1 • do not transmit message
• if logic = 1

transmit value for 1
Switching output transmits on change to 0 • do not transmit message
• if logic = 0

transmit value for 0
Switching output transmits upon change
and periodically Transmit value for current logic status
Switching output transmits upon change to
1 and periodically • if logic = 1

transmit value for 1
Switching output transmits upon change to
0 and periodically • if logic = 0

transmit value for 0
Switching output transmits upon change
and object receipt • do not transmit message
• transmit value for current logic status
Switching output transmits upon change
and object receipt and periodically Transmit value for current logic status