132
Additional settings (ETS)
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
6.1.
Interfaces
Mechanical buttons or temperature sensors may be connected to the four analogue/
digital inputs of the
Corlo Touch KNX
. The configuration is done via the menu.
ETS: Interfaces
Activate the interfaces you want to use.
6.1.1. Interface 1-4
Choose a function:
Input as switch:
If a button with switch function is assigned to the input, select the bus function
"Switch" and specify which value is sent when pressing/releasing the button and when
it will be sent.
Use interface 1 / 2 / 3 / 4
No • Yes
Bus function
• Switch
• Changeover switch
• Shutter
• Roller blind
• Awning
• Window
• Dimmer
• 8-bit encoder
• 16-bit encoder
• Scene load
• T-NTC temperature sensor
Bus function
Switch
Command when pressing the button
• send 0
• send 1
• do not send telegram
Command when releasing the button
• send 0
• send 1
• do not send telegram
Send value
• on change
• for change to 1
• for change to 0
• for change and cyclical
• for change to 1 and cyclical
• for change to 0 and cyclical
Send all values
(only if sent as "cyclical")
5 s … 2 h
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
