106
Automatic functions
Display Corlo Touch KNX
• Status: 09.03.2017 • Technical changes and errors reserved.
5.3.2. Changing basic parameters
Select "Transmit the following parameters: Yes" to render the modifications valid.
Previous settings are then overwritten - including modifications done on the display!
You may want to enter an access code for the automatic shade settings on the display.
The code is requested before the automation menus are shown.
Note:
There are no automation menus available in version 0.1 of the display software!
Then select a name for this shade. A name can be selected for each of the six available
languages (max. 15 characters).
5.3.3. Setting the blind automation
Priorities in automatic shading mode:
1. Alarm functions:
Alarm functions are used for shades in manual and in automatic mode. In case of frost,
wind or precipitation alarm, shades are retracted and may not be extended manually.
2. Shade settings:
The settings are only executed if a shade is in automatic mode and none of the alarm
functions named above is active.
The outdoor temperature lock (extended shades are
not moved any more) has the highest priority,
followed by
time opening (retraction).
time closure (extension),
Transmission behaviour of the safety/alarm
objects
• on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Transmit cycle
is only transmitted if "periodically" is
selected
5 s • ... • 2 h
Transfer the following parameters
No • Yes
Access code
(8 digits from 0 to 9)
[free text]
An empty field means that no code query is
done
Automatic name
Languages 1...6
[free text]
Summary of Contents for Corlo Touch KNX 70258
Page 2: ......
