CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
68 / 144
EN
6.1.2.2.
User ID
Most often it is not required while using public APN. For private APN, you should obtain
that parameter from the operator (without it no access to GPRS network can be granted).
6.1.2.3.
User password
Most often it is not required while using public APN. For private APN, you should obtain
that parameter from the operator (without it no access to GPRS network can be granted).
NOTE: Using private APN increases the system security.
6.1.2.4.
DNS1 and DNS2
It defines the address of primary and secondary DNS (Domain Name System). If server
address was entered as a domain name at least one DNS address must be entered.
6.1.3.
Primary Server Parameters
6.1.3.1.
Server IP Address
It is the IP address of a monitoring system receiver (OSM.Server) or a computer on which
“Communication server” software is installed, e.g. 89.123.115.8. The address can be
given as a server’s domain name, e.g. modul.gprs.com. In such a case at least one DNS
server address is required.
6.1.3.2.
Server port
It defines a port which was dedicated in the server for the receipt of data from the
equipment.
6.1.3.3.
Interval between subsequent attempts
The programmed equipment with SIM card inserted will automatically attempt to establish
connection with a server. Here you can define an interval (in seconds) after which the
equipment will retry to connect with a server, in case the previous attempt was
unsuccessful.
6.1.3.4.
Number of attempts of establishing connection with a server
You can define how many times the equipment will try to connect with the server in case
of subsequent faults. After a defined number of attempts, the equipment will initiate the
procedure of connecting with secondary server. The option is active only in case the
secondary server parameters were defined.
