CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
43 / 144
EN
4.3.16.
Wireless zones configuration
4.3.16.1.
Wireless sensors configuration
Wireless zones can be configured using complex service functions, after activation of
which, all the parameters related to the relevant zone can be given subsequently or in a
form of series of service functions that configure one zone-related parameter. Codes of
zone configuration functions are defined as per the following pattern:
<XX> <Y>
Where:
XX
– zone number from
01
to
32
, the table below shows zones names and their
corresponding numbers:
Name A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8 C1 C2 C3 C4 C5 C6 C7 C8 D1 D2 D3 D4 D5 D6 D7 D8
Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
entering number
00
will change the parameters for all zones in the system,
Y –
number of parameter related to a given zone:
For Y=0
– complex function, the initiation of which configures the parameters listed
below as another set of parameters:
For Y=1
– Delete a sensor. After selecting this option, you can confirm deleting by
pressing
key, or you can cancel function by pressing
key.
Example:
a)
delete a wireless sensor B2 (number 10, see the table above):
For Y=2
– Add a sensor. After selecting this option, the sabotage button on the sensor
has to be pressed. Once the transmission with the sensor is established, its serial
number will be displayed on the keypad (hexadecimal value). If accepted, the sensor
will be saved.
Example:
a)
add a wireless sensor B3 (number 11, see the table above):
Note:
In case of complex function (programming many
parameters at the time) after the parameter is entered and
confirmed with
,
the parameter is saved in the configuration
memory and the system waits for entering another parameter, and
so on, until all parameters of the complex service function are
entered. Press
to cancel changes entered in currently
configured parameter only and exit service function – previously
entered parameters, confirmed with
,
will not be cancelled.