CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
56 / 144
EN
5.
CONFIGURATION WIZARD
5.1.
PRELIMINARY NOTES
The
Configuration wizard
of
GPRS transmitters
can be downloaded from www.ebs.pl
(login: ebs, password: ebs). Activate the option of installation wizard which leads through
the program installation process. By default it will be installed in C:\Program Files\EBS\
directory. The installation wizard can also create shortcuts to the program on the desktop
and in the Windows menu.
If it is the first use of the equipment, SIM card shall not be inserted into the slot until the
equipment is programmed using the above software. Otherwise, SIM card can be blocked
during the attempts of giving an incorrect PIN code. Alternatively, you can use SIM card
with PIN code authorization deactivated.
In case of remote programming, SIM card must be inserted before the configuration
settings transmission is initiated. In this case use either SIM cards with PIN code
authorization deactivated or change the PIN code using a mobile phone before the card is
inserted into the equipment.
5.2.
COMPUTER – REQUIREMENTS
The minimum requirements for PC computer on which the configuration wizard is to be
installed are the following:
Hardware:
Processor 1GHz, 32-bit (x86) or 64-bit (x64)
1 GB RAM (for 32-bit) or 2 GB RAM (for 64-bit)
4,5 GB HDD,
Software:
Operating system: Windows 7 or newer
.NET Framework 4.5 software or newer.
5.3.
PROGRAM FUNCTONS
After the program is installed and started, the main window will be displayed on the
screen. From that level you can access both, program functions and programmable
parameters (see chapter 6.).
The main program window was divided into a few areas.
Main menu: located in the top section of the window, contains control and program
configuration functions.
