CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
141 / 144
EN
Description
The command returns or sets the time (in hours) after which the loss of
wireless devices is reported.
hours
is a set or desired number of hours until the reporting of the loss.
The minimum value is 2 hours, the maximum is 24, by default it is set
to 6 h.
The command returns:
CPDETECTORLOST=minutes – for the command CPDETECTORLOST=?
it returns the time set in the control panel
CPDETECTORLOST =: EOK – if the command is executed correctly
CPDETECTORLOST =: EPERMISIONS – no authorisation or wrong code
CPDETECTORLOST =: EID – when the data range is incorrect
CPDETECTORLOST =: EFORMAT – when the format of the command is
incorrect
9.1.6.
Commands for managing the security settings
9.1.6.1.
SETATSPWD
Format:
SETATSPWD=oldpwd,newpwd
Limitations:
Can be executed by ATS
Descriptrion
This command changes ATS password from
oldpwd
to
newpwd
.
The command returns:
SETATSPWD:EOK – if the password has been changed successfully
SETATSPWD:EPERMISSIONS – if sent with permissions other than ATS,
or the old ATS password entered incorrectly
SETATSPWD:ELENGTH – if length of the new password is incorrect –
longer than 7 characters, shorter than 4, or contains restricted characters
(e.g. space, #, etc.)
SETATSPWD:EFORMAT – if the format of the sent command is incorrect
