CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
97 / 144
EN
NOTE: Incoming SMSs are authorized by comparing the number from
which the SMS arrived with the ones that are entered in the table. It
is allowed to enter only a part of the number in the table e.g. 1234.
Then, all numbers containing the stipulated sequence, e.g.
600123456 or 601234567 will be accepted.
NOTE: If modem connected to OSM.Server server will be used for
sending SMS, its telephone number must be added to the above list
.
6.7.1.2.
Authorized GSM Modems Numbers
For connections in CSD channel the user can restrict a remote access to the equipment
via GSM modems. Created list of numbers (up to 5) means that the equipment can
communicate with these numbers only.
Available options are:
Restrict all: Means no possibility of communication.
Allow all: Means that communication is allowed from any telephone number.
Allow selected: Means that communication is allowed only from these listed
telephone numbers. You can define up to 5 numbers.
When ‘Allow selected’ box is checked, you receive access to an edit box. Enter the
subsequent numbers in the box and click [Add] button to move the number to the table
below. To remove the number from the table, place the cursor in a particular number
zone and click [Remove].
“Remove all” option will clear all the numbers from the table.
NOTE: Incoming CSD connection is authorized by comparing the number
from which it arrived with the ones that are entered in the table. It is allowed
to enter only a part of the number in the table e.g. 1234. Then, all numbers
containing the stipulated sequence, e.g. 600123456 or 601234567 will be
accepted.
NOTE: If modem connected to OSM.Server server will be used for incoming
CSD connection, its telephone number must be added to the above list.
6.7.1.3.
Validity Period of Outgoing SMS
The user can define time for the equipment to transfer information via SMS. Validity
period is defined separately for the following groups of information:
SMS tests to server
SMS events sent to server
SMS events sent to the user
Replies to commands
