CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
25 / 144
EN
Buttons on the KP2W keypad function the same as on the KP32 keypad (see section
3.6.1 Description of keypad elements - points 17 to 27). After first pressing any
button, the keypad is backlit. After a few-second idle time, backlight gets
automatically dimmed.
4.
Anti-sabotage switch
After the keypad is assembled the anti-sabotage switch is closed. Unauthorized
disassembly of the keypad will send the message to the alarm control panel.
5.
Canal for wires
6.
Mainboard
7.
Antenna 433,92MHz
8.
Battery
Lithium Battery CR123A 3V.
9.
Screw Connector
Connector for wired magnet contact - open door switch. Keep closed if not used.
10.
Sabotage sensor (tamper)
11.
Buzzer
3.7.3.
Keypad specification
Power supply:
1 battery CR123A 3V
Working time:
3 years*
Frequency of operation:
433.92 MHz
Communication range:
up to 500m (open air)
Communication:
one way
Average current consumption:
30 μA
Operation temperature:
-10 °C +55 °C
Alarm inputs:
1, NC type
Dimensions:
125 x 102 x 33 mm
Wight without battery:
150 g
*Working conditions: test transmission every 15 minutes, keyboard use (arming/disarming) 2 times a day,
open door switch closed, working temperature 20°C