CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
77 / 144
EN
In the new window, select proper connection (serial port number to which CPX230NWB is
connected) and zone number for new device. Then enter service code and press “Read”
button. A new window pops up with an information about the control panel starting
listening for wireless devices.
Configurator will be waiting for a wireless signal. User has to press the tamper button on
the sensor for a while. CPX230NWB will detect the transmission and print sensor’s type
and ID. It is recommended to add wireless sensors individually. To prevent the accidental
transmissions from other detectors, only one detector cover should be removed during
the procedure of adding a new detector. The control panel detects the communication,
and informs the user about the type and serial number of the device.
To bind this sensor with the Alarm Control panel, press “Add Device”. New sensor will
appear in the previously selected Zone row:
