CPX230NWB ALARM CONTROL PANEL – INSTALLER MANUAL
58 / 144
EN
configuration wizard’s windows on a hard drive. After calling the function, a window
asking for file name is displayed. By default, data is saved in files with
.cmi
extension.
5.3.1.4.
Menu -> Language
This option allows selecting one of available languages (defined in enclosed external
language files).
5.3.1.5.
File -> Connections
Before you start the equipment programming, define the type of connection to be used.
There are two programming methods available: local and remote.
Local connection
5.3.1.5.1.
Local connection means that configuration wizard (or, in fact, a computer, on which it is
installed) is directly connected to a relevant connector of the alarm control panel via
dedicated programming cable using RS-232 serial port (GD-PROG) or USB port or
Bluetooth (MINI-PROG-BT, SP-PROG-BT). All channel connection (also USB and
Bluetooth) "open" virtual COM serial ports used in communication control panel-
Configurator.
To program the equipment or perform other activities (i.e. read the settings from the
equipment, change the firmware, etc.) you have to define the connection parameters.
For the above purpose you shall use the following window, available after activating File
option from the Main Menu and selecting Connection function or after clicking
icon on
a taskbar and opening RS232 tab.
Define:
Connection name, e.g. Local
Select serial port, e.g. COM1
Click [Add] button to confirm the setting. The connection is saved (and moved to the
table). From that moment the program will enable a wire connection with the equipment
and allows reading and recording the parameters in the equipment’s memory.